{"title":"Shapers","description":"","products":[{"product_id":"oliver-machinery-shaper-7-5hp-3ph","title":"Shaper 7.5HP 3Ph","description":"\u003cdiv\u003eThe Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3\/4” or 1-1\/4” spindles. With a 4” spindle travel and cutter diameters up to 8” no job is out of the question. A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance. With the skilled woodworker in mind, Oliver put a lot of thought into its fence design. With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eMassive cast iron precision ground table provides a solid work surface.\u003c\/li\u003e\n\u003cli\u003eTable features pre-drilled and threaded holes for power feeder.\u003c\/li\u003e\n\u003cli\u003eCast iron base provides a steady platform.\u003c\/li\u003e\n\u003cli\u003e3\/4” and 1-1\/4” interchangeable spindles are included for added versatility.\u003c\/li\u003e\n\u003cli\u003eThree spindle speeds (plus reversing) allow more choices to produce a better finish.\u003c\/li\u003e\n\u003cli\u003eInnovative dovetail design accurately raises and lowers the spindle.\u003c\/li\u003e\n\u003cli\u003eFence is independent and features micro adjustments for quick set-up and miter gauge included.\u003c\/li\u003e\n\u003cli\u003eTop mounted control panel includes a digital readout for spindle height with large hand wheel for adjustments.  \u003c\/li\u003e\n\u003cli\u003eMagnetic controls with emergency off switch for safer operation.\u003c\/li\u003e\n\u003cli\u003ePowerful TEFC 7.5HP 3Ph 220V\/440V motor; prewired 220V \u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5 business days, unless the item is on backorder. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eReturns are accepted by Oliver Machinery within 30 days of receipt.  Return Materials Authorization (RMA) required prior to return.  A 20% restocking fee will be applied.  Customer responsible for return freight.  Contact Woodcraft Customer Service for return assistance at 1-800-225-1153.\u003cbr\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eOliver Machinery warrants its products to the original customer as free from defects for a period of two years on parts and 1 year for the electronics and motor.\u003c\/div\u003e","brand":"Oliver Machinery","offers":[{"title":"Default Title","offer_id":43401671409802,"sku":"184025","price":5199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/184025_000_001.jpg?v=1719948905"},{"product_id":"oliver-machinery-shaper-5hp-1ph","title":"4705 Shaper - 5 HP - 1 PH- 18A - 220V","description":"\u003cdiv\u003eThe Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3\/4” or 1-1\/4” spindles. With a 4” spindle travel and cutter diameters up to 8” no job is out of the question. A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance. With the skilled woodworker in mind, Oliver put a lot of thought into its fence design. With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eMassive cast iron precision ground table provides a solid work surface.\u003c\/li\u003e\n\u003cli\u003eTable features pre-drilled and threaded holes for power feeder.\u003c\/li\u003e\n\u003cli\u003eCast iron base provides a steady platform.\u003c\/li\u003e\n\u003cli\u003e3\/4” and 1-1\/4” interchangeable spindles are included for added versatility.\u003c\/li\u003e\n\u003cli\u003eThree spindle speeds (plus reversing) allow more choices to produce a better finish.\u003c\/li\u003e\n\u003cli\u003eInnovative dovetail design accurately raises and lowers the spindle.\u003c\/li\u003e\n\u003cli\u003eFence is independent and features micro adjustments for quick set-up and miter gauge included.\u003c\/li\u003e\n\u003cli\u003eTop mounted control panel includes a digital readout for spindle height with large hand wheel for adjustments.  \u003c\/li\u003e\n\u003cli\u003eMagnetic controls with emergency off switch for safer operation.\u003c\/li\u003e\n\u003cli\u003ePowerful TEFC 5HP 1Ph 220V (only) motor \u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5 business days, unless the item is on backorder. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eReturns are accepted by Oliver Machinery within 30 days of receipt.  Return Materials Authorization (RMA) required prior to return.  A 20% restocking fee will be applied.  Customer responsible for return freight.  Contact Woodcraft Customer Service for return assistance at 1-800-225-1153.\u003cbr\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eOliver Machinery warrants its products to the original customer as free from defects for a period of two years on parts and 1 year for the electronics and motor.\u003c\/div\u003e","brand":"Oliver Machinery","offers":[{"title":"Default Title","offer_id":43401678454922,"sku":"184024","price":5199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/184024_000_001.jpg?v=1719948913"},{"product_id":"laguna-compact-shaper-mshap4spd-3-0130","title":"Compact Shaper - 3 HP - 1 PH - 220V","description":"\u003cp\u003eThis compact shaper from Laguna Tools is regarded as one of the best in its class. It features an impressive precision fence and wide-range of RPMs making it a versatile investment. This compact shaper has 4 speeds, a generous-sized table, wheels built-in, and Easy Spindle Lock making tool changes a snap. One of the most impressive features is the speed change. A simple pull of a handle compresses the distance from the spindle to the pulley, changing speeds along the way. Another outstanding detail is the flat poly-groove belt which transfers more power with less vibration; something you won’t find in this price range anywhere else.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMotor: 3HP, 1 Phase, 220 Volt 60 Hz\u003c\/li\u003e\n\u003cli\u003eTable Size:32″ x 26-1\/2″\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 4″\u003c\/li\u003e\n\u003cli\u003eSpindle Sizes: 3\/4″ \u0026amp; 1-1\/4″ (Incl.)\u003c\/li\u003e\n\u003cli\u003eRouter Collets: 1\/4″ \u0026amp; 1\/2″ (Incl.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMotor: 3HP, 1 Phase, 220 Volt 60 Hz\u003c\/li\u003e\n\u003cli\u003eTable Size: 32″ x 26-1\/2″\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 4″\u003c\/li\u003e\n\u003cli\u003eSpindle Sizes: 3\/4″ \u0026amp; 1-1\/4″ (Incl.)\u003c\/li\u003e\n\u003cli\u003eRouter Collets: 1\/4″ \u0026amp; 1\/2″ (Incl.)\u003c\/li\u003e\n\u003cli\u003eCapacity Under Nut: 4″ (1-¼″ Spindle)\u003c\/li\u003e\n\u003cli\u003eSpindle Speeds: 4000, 6000, 8000, 10000 RPM\u003c\/li\u003e\n\u003cli\u003eForward\/Reverse: Yes\u003c\/li\u003e\n\u003cli\u003eTable Opening Diameter: 6-¼″\u003c\/li\u003e\n\u003cli\u003eTable Insert Opening Diameter: 2-½″, 4-5\/16″\u003c\/li\u003e\n\u003cli\u003eRotation: Forward\/Reverse\u003c\/li\u003e\n\u003cli\u003eTable T-Slot: Yes\u003c\/li\u003e\n\u003cli\u003eFence Size: 4-13\/16″ x 16″\u003c\/li\u003e\n\u003cli\u003eDrive Belt: Flat Poly-Groove\u003c\/li\u003e\n\u003cli\u003eTable Height From Floor: 34″\u003c\/li\u003e\n\u003cli\u003eDust Port Diameter: 4″\u003c\/li\u003e\n\u003cli\u003eMicro Adjustment On Fence: Yes\u003c\/li\u003e\n\u003cli\u003eWheel System: Built In\u003c\/li\u003e\n\u003cli\u003eWeight (Net\/Ship): 450\/500 lbs\u003c\/li\u003e\n\u003cli\u003eShipping Dimensions (L x W x H): 40″ x 30″ x 42″\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Laguna Compact Shaper - 3 HP - 1 PH - 220V\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eYour order will ship in approximately \u003cb\u003e4 weeks.\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e \u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e \u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003cli\u003eLiftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eLaguna does \u003cstrong\u003enot\u003c\/strong\u003e accept returns.  If your shipment was damaged, please refuse delivery, for defective items, please contact Woodcraft Supply customer service @ 1-800-535-4482.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eNew woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades' welds are backed by their 1-yr manufacturer's warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers’ defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect. They require that the defective item\/part be returned to Laguna Tools with the complaint. In the event the item\/part is determined to be damaged due to lack of maintenance, cleaning or misuse\/abuse, the customer will be responsible for the cost to replace the item\/part, plus all related shipping charges. \u003c\/p\u003e\n\u003cp\u003eFor warranty repair information, call 1-800-332-4094.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":43401888661642,"sku":"417660","price":3649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/417660_000_001.jpg?v=1720479436"},{"product_id":"laguna-pro-shaper","title":"Pro Shaper - 7-1\/2 HP - 3Ph","description":"\u003cp\u003eThe Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines.\u003cbr\u003eFor starters, the table measures an impressive 31\" x 39\" and is predrilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1\/16\" adjustment to the fence. Inside you will find a heavy-duty motor available in either 5HP 220 volt single phase or 7.5 HP 220 volt three phase. Each offers 3 speeds with a unique quick-change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The Pro Shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel.\u003cbr\u003eThe fit and finish on this machine are top-notch and even includes a wheel kit built right into the base. The Laguna Pro Shaper is designed to give you years of trouble-free performance without breaking the bank. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMotor: 7.5HP 3 phase 220V 60 HZ\u003c\/li\u003e\n\u003cli\u003eTable size: 39-5\/16″ X 31-7\/16″ X 3-1\/2″\u003c\/li\u003e\n\u003cli\u003eSpindle travel: 4″\u003c\/li\u003e\n\u003cli\u003eSpindle Sizes: 3\/4″ and 1-1\/4″\u003c\/li\u003e\n\u003cli\u003eCapacity Under Nut: 6″ (for 1-1\/4″) \u0026amp; 4″ (for 3\/4″)\u003c\/li\u003e\n\u003cli\u003eRouter Collets: 1\/4″ and 1\/2″\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: 5000 \/ 7000 \/ 10000 rpm\u003c\/li\u003e\n\u003cli\u003eTable Opening Diameter: 7-5\/16″\u003c\/li\u003e\n\u003cli\u003eDigital Readout: Standard\u003c\/li\u003e\n\u003cli\u003eDirection: Forward\/Reversing Switch\u003c\/li\u003e\n\u003cli\u003eFence: Micro Adjustment\u003c\/li\u003e\n\u003cli\u003eWeight (Net\/Ship): 640\/720 Lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e(1)  Laguna Pro Shaper - 7-1\/2 HP - 3Ph\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eYour order will ship in approximately \u003cb\u003e4 weeks.\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e \u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e \u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003cli\u003eLiftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eLaguna does \u003cstrong\u003enot\u003c\/strong\u003e accept returns.  If your shipment was damaged, please refuse delivery, for defective items, please contact Woodcraft Supply customer service @ 1-800-535-4482.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eNew woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades' welds are backed by their 1-yr manufacturer's warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers’ defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect. They require that the defective item\/part be returned to Laguna Tools with the complaint. In the event the item\/part is determined to be damaged due to lack of maintenance, cleaning or misuse\/abuse, the customer will be responsible for the cost to replace the item\/part, plus all related shipping charges. \u003c\/p\u003e\n\u003cp\u003eFor warranty repair information, call 1-800-332-4094.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":43402717397130,"sku":"183583","price":5599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/183583_000_001.jpg?v=1719952055"},{"product_id":"oliver-machinery-shaper-5hp-1ph-1","title":"10047 Shaper - 5 HP - 1 PH - 20A - 220V","description":"\u003cdiv\u003eThe Oliver 10047 Shaper is a precision machine perfect for edge-profiling or making door stiles, rails, and panels.  We offer this machine with either a 3HP 1Ph or 5HP 1Ph motor to meet various power needs.     \u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eLarge cast iron table is precision ground table to provide a solid work surface.\u003c\/li\u003e\n\u003cli\u003eTable features pre-drilled and threaded holes for optional power feeder.\u003c\/li\u003e\n\u003cli\u003e1-1\/4” interchangeable spindle included, other optional sizes and router bit collets available.\u003c\/li\u003e\n\u003cli\u003eFour spindle speeds for versatility\u003c\/li\u003e\n\u003cli\u003ePoly V-belt changes are quick and convenient with unique tensioner.\u003c\/li\u003e\n\u003cli\u003e4\" spindle travel and reverses for more options with each set-up.\u003c\/li\u003e\n\u003cli\u003eFence is independent and includes micro adjustments and includes starting pin for irregular shapes.\u003c\/li\u003e\n\u003cli\u003eIncludes adjustable hold downs for safer operation and miter gauge. \u003c\/li\u003e\n\u003cli\u003eExtra large handwheel for easy and quick height adjustment.\u003c\/li\u003e\n\u003cli\u003ePowerful TEFC motor in 5HP 1Ph 20A 220V only with magnetic controls for added safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5 business days, unless the item is on backorder. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eReturns are accepted by Oliver Machinery within 30 days of receipt.  Return Materials Authorization (RMA) required prior to return.  A 20% restocking fee will be applied.  Customer responsible for return freight.  Contact Woodcraft Customer Service for return assistance at 1-800-225-1153.\u003cbr\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eOliver Machinery warrants its products to the original customer as free from defects for a period of two years on parts and 1 year for the electronics and motor.\u003c\/div\u003e","brand":"Oliver Machinery","offers":[{"title":"Default Title","offer_id":43402720313482,"sku":"184032","price":3799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/184032_000_001.jpg?v=1719948917"},{"product_id":"oliver-machinery-shaper-3hp-1ph","title":"Shaper 3HP 1Ph","description":"\u003cdiv\u003eThe Oliver 10047 Shaper is a precision machine perfect for edge-profiling or making door stiles, rails, and panels.  We offer this machine with either a 3HP 1Ph or 5HP 1Ph motor to meet various power needs.     \u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eLarge cast iron table is precision ground table to provide a solid work surface.\u003c\/li\u003e\n\u003cli\u003eTable features pre-drilled and threaded holes for optional power feeder.\u003c\/li\u003e\n\u003cli\u003e1-1\/4” interchangeable spindle included, other optional sizes and router bit collets available.\u003c\/li\u003e\n\u003cli\u003eFour spindle speeds for versatility\u003c\/li\u003e\n\u003cli\u003ePoly V-belt changes are quick and convenient with unique tensioner.\u003c\/li\u003e\n\u003cli\u003e4\" spindle travel and reverses for more options with each set-up.\u003c\/li\u003e\n\u003cli\u003eFence is independent and includes micro adjustments and includes starting pin for irregular shapes.\u003c\/li\u003e\n\u003cli\u003eIncludes adjustable hold downs for safer operation and miter gauge. \u003c\/li\u003e\n\u003cli\u003eExtra large handwheel for easy and quick height adjustment.\u003c\/li\u003e\n\u003cli\u003ePowerful TEFC motor in 3HP 1Ph 13A 220V only with magnetic controls for added safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5 business days, unless the item is on backorder. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eReturns are accepted by Oliver Machinery within 30 days of receipt.  Return Materials Authorization (RMA) required prior to return.  A 20% restocking fee will be applied.  Customer responsible for return freight.  Contact Woodcraft Customer Service for return assistance at 1-800-225-1153.\u003cbr\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eOliver Machinery warrants its products to the original customer as free from defects for a period of two years on parts and 1 year for the electronics and motor.\u003c\/div\u003e","brand":"Oliver Machinery","offers":[{"title":"Default Title","offer_id":43402720706698,"sku":"184031","price":3499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/184031_000_001.jpg?v=1719948916"},{"product_id":"powermatic-shaper-5hp-3-ph-230-460v-pm2700","title":"Shaper - 5HP 3 Ph 230\/460V - PM2700","description":" The Powermatic PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eAdding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eIntegrated caster system built into the cast iron base for instant shop mobility\u003c\/li\u003e\n\u003cli\u003eSpindle height digital readout for making fine incremental adjustments on multiple passes\u003c\/li\u003e\n\u003cli\u003eHeavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003c\/li\u003e\n\u003cli\u003eConvenient quick lock belt tensioning for easy speed adjustment\u003c\/li\u003e\n\u003cli\u003eIndustrial fence system with fine adjust dials for more precise positioning\u003c\/li\u003e\n\u003cli\u003e5HP totally enclosed motor offers plenty of power\u003c\/li\u003e\n\u003cli\u003eTwo spindle speeds (reversible) for a variety of work\u003c\/li\u003e\n\u003cli\u003eSuperior clear cutter guard promotes safety, allows observation of the entire cut\u003c\/li\u003e\n\u003cli\u003eTable predrilled and tapped for feeder mounting in two locations\u003c\/li\u003e\n\u003cli\u003eFence has dual featherboards for work holding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e4\" port for attachment to dust collection system\u003c\/li\u003e\n\u003cli\u003e3\/4\" and 1-1\/4\" interchangeable spindle collets\u003c\/li\u003e\n\u003cli\u003eFeatherboard hold downs\u003c\/li\u003e\n\u003cli\u003eDeluxe miter gauge\u003c\/li\u003e\n\u003cli\u003eIntegrated caster system\u003c\/li\u003e\n\u003cli\u003eDust Collection Minimum CFM Required : 600\u003c\/li\u003e\n\u003cli\u003eDust Port Diameter (OD\/in) : 4 (dual ports)\u003c\/li\u003e\n\u003cli\u003eElectrical Controls - Magnetic Starter : magnetic\u003c\/li\u003e\n\u003cli\u003eFence Size (L x H\/in) : 18-3\/4 \u0026amp; 4-7\/8\u003c\/li\u003e\n\u003cli\u003eHeight (in) : 45\u003c\/li\u003e\n\u003cli\u003eLength (in) : 40\u003c\/li\u003e\n\u003cli\u003eModel Number : PM2700\u003c\/li\u003e\n\u003cli\u003eMotor HP : 5HP\u003c\/li\u003e\n\u003cli\u003eMotor Phase : 3Ph\u003c\/li\u003e\n\u003cli\u003eMotor Voltage : 230V\/460V*\u003c\/li\u003e\n\u003cli\u003eNet Weight : 664 pound\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions : 40x37x45\u003c\/li\u003e\n\u003cli\u003ePart Number : 1280102C\u003c\/li\u003e\n\u003cli\u003ePrewired : Prewired 230V, *requires 460V magnetic switch\u003c\/li\u003e\n\u003cli\u003eReversible : Yes\u003c\/li\u003e\n\u003cli\u003eRouter Bit Collet Diameter (in) : 1\/4 and 1\/2 (optional)\u003c\/li\u003e\n\u003cli\u003eSpindle Diameter (in) : 3\/4, 1-1\/4\u003c\/li\u003e\n\u003cli\u003eSpindle Size Under Nut (in) : 3\/4 spnd = 3-3\/4, 1-1\/4 spnd = 6\u003c\/li\u003e\n\u003cli\u003eSpindle Speed (RPM) : 7,500 \u0026amp; 10,000\u003c\/li\u003e\n\u003cli\u003eSpindle Travel (in) : 4\u003c\/li\u003e\n\u003cli\u003eTable Height From Floor (in) : 35-1\/2\u003c\/li\u003e\n\u003cli\u003eTable Insert Opening Diameter (in) : 2.55, 4.16, 5.75\u003c\/li\u003e\n\u003cli\u003eTable Inserts : (3) 2.55\", 4.16\", 5.75\" I.D.\u003c\/li\u003e\n\u003cli\u003eTable Opening Diameter (in) : 7-3\/8\u003c\/li\u003e\n\u003cli\u003eTable Size (in) : 40 x 30\u003c\/li\u003e\n\u003cli\u003eTable T-Slot (in) : standard\u003c\/li\u003e\n\u003cli\u003eWidth (in): 37\u003c\/li\u003e\n\u003cli\u003eShipping weight 690 lb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 4 -7 approximately business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. \u003c\/p\u003e\u003c\/div\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":43402886807690,"sku":"412064","price":5719.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/412064_000_001.jpg?v=1719948936"},{"product_id":"jet-shaper-1-1-2-hp-1-ph-115v-jws-20cs","title":"Shaper -1-1\/2 HP 1 Ph 115V - JWS-20CS","description":"\u003cdiv\u003eWhen your in need of a space-saving shaper for your shop, the new JET® JWS-20CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 1-1\/2 HP motor. The sleek 18\"(L) X 20\" (W) precision ground cast iron table provides a durable work area for various projects. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4” dust port. When add the new JET JWS-20CS Shaper in your shop today, you'll know why JET products are \"Built Better to Build Better.\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePowerful 1-1\/2 HP motor delivers dependable power, even on heavy jobs\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fences feature micro-adjustment and have zero-clearance capability\u003c\/li\u003e\n\u003cli\u003eFully enclosed, heavy-duty steel stand has a removable cover for easy motor access\u003c\/li\u003e\n\u003cli\u003eForward\/reverse switch for left and right hand operation\u003c\/li\u003e\n\u003cli\u003eExtra-large handwheel is conveniently located for fast, easy, and accurate spindle height adjustments\u003c\/li\u003e\n\u003cli\u003e1\/2\" and 3\/4\" interchangeable spindles and router bit collets for use with shaper cutter and router bits\u003c\/li\u003e\n\u003cli\u003eTwo adjustable work hold-downs to secure your work while shaping\u003c\/li\u003e\n\u003cli\u003eTwo reversible spindle speeds lets you select the best speed and torque for different cutter diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMinimum Dust Collection: 300 CFM\u003c\/li\u003e\n\u003cli\u003e4\" Dust Port Outside Diameter\u003c\/li\u003e\n\u003cli\u003eElectrical Controls: Manual\u003c\/li\u003e\n\u003cli\u003eFence Size: 10\"L x 3\"H\u003c\/li\u003e\n\u003cli\u003eMotor: 1.5 HP, 1PH, 115V, 15\/7.5 Amps\u003c\/li\u003e\n\u003cli\u003eReversible\u003c\/li\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003eSpindle Speed: 8,000 and 10,000 RPM's\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 2\"\u003c\/li\u003e\n\u003cli\u003eFloor Standing Model: 33-1\/2 H\u003c\/li\u003e\n\u003cli\u003eTable Size: 18\" L x 20\" W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(1) Shaper\u003c\/li\u003e\n\u003cli\u003e(1) Dust Chute\u003c\/li\u003e\n\u003cli\u003e(1) Miter Gauge\u003c\/li\u003e\n\u003cli\u003e(1) Draw Bar \u0026amp; Nut\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2” Spindle Assembly\u003c\/li\u003e\n\u003cli\u003e(1) 3\/4” Spindle Assembly\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Router Collet\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" Router Collet\u003c\/li\u003e\n\u003cli\u003e(1) Arbor Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3mm Hex Key Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 12mm \/ 14mm Open End Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":43403682185354,"sku":"188391","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/188391_000_001.jpg?v=1719948928"},{"product_id":"powermatic-shaper-5-hp-1-ph-230v-pm2700","title":"Shaper - 5 HP 1 Ph 230V - PM2700","description":"\u003cdiv\u003eThis new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003cspan\u003e\u003cp\u003eFeatures:\u003cbr\u003eIntegrated caster system built into the cast iron base for instant shop mobility\u003cbr\u003eSpindle height digital readout for making fine incremental adjustments on multiple passes\u003cbr\u003eHeavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003cbr\u003eConvenient quick lock belt tensioning for easy speed adjustment\u003cbr\u003eIndustrial fence system with fine adjust dials for more precise positioning\u003cbr\u003e3HP totally enclosed motor offers plenty of power\u003cbr\u003eTwo spindle speeds (reversible) for a variety of work\u003cbr\u003eSuperior clear cutter guard promotes safety, allows observation of the entire cut\u003cbr\u003eTable predrilled and tapped for feeder mounting in two locations\u003cbr\u003eFence has dual featherboards for work holding\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e4\" port for attachment to dust collection system\u003cbr\u003e3\/4\" and 1-1\/4\" interchangeable spindle collets\u003cbr\u003eSpindle height digital readout\u003cbr\u003eFeatherboard hold downs\u003cbr\u003eDeluxe miter gauge\u003cbr\u003eIntegrated caster system\u003cbr\u003eSpecifications: \u003cbr\u003eAmps : 14\u003cbr\u003eDigital Readouts : spindle height\u003cbr\u003eDust Collection Minimum CFM Required : 600\u003cbr\u003eDust Port Diameter (OD\/in) : 4 (dual ports)\u003cbr\u003eElectrical Controls - Magnetic Starter : magnetic\u003cbr\u003eFence Size (L x H\/in) : 18-3\/4 x 4-7\/8\u003cbr\u003eHeight (in): 45\u003cbr\u003eLength (in): 40\u003cbr\u003eMotor HP : 3HP\u003cbr\u003eMotor Phase : 1PH\u003cbr\u003eMotor Voltage : 230V\u003cbr\u003eNet Weight : 664 pound\u003cbr\u003eOverall Dimensions : 40x37x45\u003cbr\u003ePart Number : 1280100C\u003cbr\u003eReversible : Yes\u003cbr\u003eRouter Bit Collet Diameter (in) : 1\/4 and 1\/2 (optional)\u003cbr\u003eSpindle Diameter (in) : 3\/4, 1-1\/4\u003cbr\u003eSpindle Size Under Nut (in) : 3\/4 spnd = 3-3\/4, 1-1\/4 spnd = 6\u003cbr\u003eSpindle Speed (RPM) : 7,500 \u0026amp; 10,000\u003cbr\u003eSpindle Travel (in) : 4\u003cbr\u003eTable Height From Floor (in) : 35-1\/2\u003cbr\u003eTable Insert Opening Diameter (in) : 2.55, 4.16, 5.75\u003cbr\u003eTable Inserts : (3) 2.55\", 4.16\", 5.75\" I.D.\u003cbr\u003eTable Opening Diameter (in) : 7-3\/8\u003cbr\u003eTable Size (in) : 40 x 30\u003cbr\u003eTable T-Slot (in) : standard\u003cbr\u003eWidth (in): 37\u003cbr\u003eShipping weight 698 lb.\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 4 -7 approximately business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. \u003c\/p\u003e\u003c\/div\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":43403704860810,"sku":"836688","price":5719.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/836688_000_001.jpg?v=1719948934"},{"product_id":"powermatic-shaper-3-hp-1-ph-230v-pm2700","title":"Shaper - 3 HP 1 Ph 230V - PM2700","description":"\u003cdiv\u003eThis new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003cbr\u003eFeatures\u003cbr\u003e•  Integrated caster system built into the cast iron base for instant shop mobility\u003cbr\u003e•  Spindle height digital readout for making fine incremental adjustments on multiple passes\u003cbr\u003e•  Heavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003cbr\u003e•  Convenient quick lock belt tensioning for easy speed adjustment\u003cbr\u003e•  Industrial fence system with fine adjust dials for more precise positioning\u003cbr\u003e•  3HP totally enclosed motor offers plenty of power\u003cbr\u003e•  Two spindle speeds (reversible) for a variety of work\u003cbr\u003e•  Superior clear cutter guard promotes safety, allows observation of the entire cut\u003cbr\u003e•  Table predrilled and tapped for feeder mounting in two locations\u003cbr\u003e•  Fence has dual featherboards for work holding\u003cbr\u003e• 4\" port for attachment to dust collection system\u003cbr\u003e•  3\/4\" and 1-1\/4\" interchangeable spindle collets\u003cbr\u003e•  Spindle height digital readout\u003cbr\u003e•  Featherboard hold downs\u003cbr\u003e•  Deluxe miter gauge\u003cbr\u003e•  Integrated caster system\u003cbr\u003eSpecifications:\u003cbr\u003eAmps : 14\u003cbr\u003eDigital Readouts : spindle height\u003cbr\u003eDust Collection Minimum CFM Required : 600\u003cbr\u003eDust Port Diameter (OD\/in) : 4 (dual ports)\u003cbr\u003eElectrical Controls - Magnetic Starter : magnetic\u003cbr\u003eFence Size (L x H\/in) : 18-3\/4 x 4-7\/8\u003cbr\u003eHeight (in): 45\u003cbr\u003eLength (in): 40\u003cbr\u003eMotor HP : 3HP\u003cbr\u003eMotor Phase : 1PH\u003cbr\u003eMotor Voltage : 230V\u003cbr\u003eNet Weight : 664 pound\u003cbr\u003eOverall Dimensions : 40x37x45\u003cbr\u003ePart Number : 1280100C\u003cbr\u003eReversible : Yes\u003cbr\u003eRouter Bit Collet Diameter (in) : 1\/4 and 1\/2 (optional)\u003cbr\u003eSpindle Diameter (in) : 3\/4, 1-1\/4\u003cbr\u003eSpindle Size Under Nut (in) : 3\/4 spnd = 3-3\/4, 1-1\/4 spnd = 6\u003cbr\u003eSpindle Speed (RPM) : 7,500 \u0026amp; 10,000\u003cbr\u003eSpindle Travel (in) : 4\u003cbr\u003eTable Height From Floor (in) : 35-1\/2\u003cbr\u003eTable Insert Opening Diameter (in) : 2.55, 4.16, 5.75\u003cbr\u003eTable Inserts : (3) 2.55\", 4.16\", 5.75\" I.D.\u003cbr\u003eTable Opening Diameter (in) : 7-3\/8\u003cbr\u003eTable Size (in) : 40 x 30\u003cbr\u003eTable T-Slot (in) : standard\u003cbr\u003eWidth (in): 37\u003cbr\u003eShipping weight 698 lb.\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 4 -7 approximately business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. \u003c\/p\u003e\u003c\/div\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":43403705778314,"sku":"836722","price":5499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/836722_000_001.jpg?v=1719948934"},{"product_id":"jet-industrial-shaper-3-hp-1-ph-230v-jws-35x3-1","title":"Industrial Shaper - 3 HP 1 Ph 230V - JWS-35X3-1","description":"\u003cdiv\u003e\u003ca href=\"\/media\/W1siZiIsIjIwMTcvMDUvMjUvMTcvNTIvNTgvNzMwL0pFVF9SRURfQXNzdXJhbmNlX1JFUEZseWVyLnBkZiJdXQ\/JET-RED-Assurance-REPFlyer.pdf?sha=737679481e2ebf11\" target=\"_blank\"\u003e\u003cimg src=\"\/media\/W1siZiIsIjIwMTcvMDUvMjUvMTcvNTEvMzQvNjY5L0pFVF9SRURBc3N1cmFuY2VfTG9nb19XZWIucG5nIl1d\/JET-REDAssurance-Logo-Web.png?sha=b8c36f41449c5480\"\u003e\u003c\/a\u003e\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003eThe Jet® Industrial Shaper - 3 HP 1 Ph 230V - JWS-35X3-1 is a powerful and versatile woodworking machine that is designed to handle even the toughest shaping and cutting tasks. With a 3 horsepower motor and a large cutting capacity, this shaper is ideal for professional woodworkers who demand the best.\u003cbr\u003e\u003cbr\u003eFeaturing a heavy-duty, cast-iron table and a precision-ground spindle, the Jet Industrial Shaper delivers smooth, accurate results every time. The table has multiple T-slots for easy attachment of jigs and fixtures, and the spindle is easily adjustable for different cutter heights.\u003cbr\u003eThe JWS-35X3-1 comes with a variety of features that make it easy to use and maintain. The magnetic controls are conveniently located for easy access, and the dust hood is designed to efficiently capture debris and keep your work area clean. The machine also includes a large, convenient on\/off switch that is easy to use and provides quick access to the power supply. Overall, this shaper is an excellent choice for professional woodworkers who demand the very best.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePowerful motor for even the toughest woodworking projects\u003c\/li\u003e\n\u003cli\u003eLarge table to provide ample workspace for large projects.  The table is also adjustable for your specific project needs.\u003c\/li\u003e\n\u003cli\u003ePrecision fence allows accurate and repeatable cuts\u003c\/li\u003e\n\u003cli\u003eVariable speed control which allows for maximum versatility for all projects\u003c\/li\u003e\n\u003cli\u003eThe spindle lock makes it easy change bits quickly\u003c\/li\u003e\n\u003cli\u003eLarge on\/off switch for added safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 3HP, 1Ph, 14A, 230V\/60Hz\u003c\/li\u003e\n\u003cli\u003eTable Size (L x W): 32-1\/4\" x 26-3\/4\"\u003c\/li\u003e\n\u003cli\u003eTable T-Slot: 3\/4\" W x 3\/8\" D\u003c\/li\u003e\n\u003cli\u003eTable Height from Floor: 34\"\u003c\/li\u003e\n\u003cli\u003eTable Opening Diameter: 6-19\/64\"\u003c\/li\u003e\n\u003cli\u003eInsert Opening Diameters: 2-9\/16\" and 4-5\/16\"\u003c\/li\u003e\n\u003cli\u003eSpindle Size (Standard): 1-1\/4\" Interchangeable\u003c\/li\u003e\n\u003cli\u003eSpindle Capacity Under Nut: 1-1\/4\" Spindle - 4-3\/32\"\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 4\"\u003c\/li\u003e\n\u003cli\u003eSpindle Speeds (RPM): 4000, 6000, 8000, 10000\u003c\/li\u003e\n\u003cli\u003eReversible: Yes\u003c\/li\u003e\n\u003cli\u003eFence Size: 4-7\/8\" H x 16\" W\u003c\/li\u003e\n\u003cli\u003eDust Collection Minimum CFM Required: 600\u003c\/li\u003e\n\u003cli\u003eDust Port Diameter: 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Size (L x W x H): 32-1\/4\" x 28-1\/4\" x 42-3\/8\"\u003c\/li\u003e\n\u003cli\u003eNet Weight: 475 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Jet® Industrial Shaper - 3 HP 1 Ph 230V - JWS-35X3-1\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":43403851923594,"sku":"840924","price":4168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/840924_000_001.jpg?v=1755210576"},{"product_id":"powermatic-shaper-with-sliding-table-7-1-2-hp-3-ph-230-460v-ts29","title":"Shaper with Sliding Table - 7-1\/2 HP 3 Ph 230\/460V - TS29","description":"\u003cdiv\u003eThe new TS29 Tilt\/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1\/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56\" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.\u003cspan\u003e\u003cp\u003eFeatures:\u003cbr\u003e•  Sliding table with 4-foot stroke works with miter head, hold-down and fence to accommodate everything from multiple end cuts to tenons\u003cbr\u003e•  Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability\u003cbr\u003e•  Large table with built-in slider with room for stock feeder\u003cbr\u003e•  7\" vertical spindle travel allows stacked tooling\u003cbr\u003e•  Spindle tilts negative 5° to positive 45° for increased versatility\u003cbr\u003e•  Large diameter multiple table inserts accommodate virtually any size cutter\u003cbr\u003e•  Five spindle speeds in forward and reverse with lighted indicator\u003cbr\u003eSpecifications: \u003cbr\u003eDust Collection Minimum CFM Required : 800\u003cbr\u003eDust Port Diameter (OD\/in.) : 5 (dual ports)\u003cbr\u003eElectrical Controls - Magnetic Starter : 24V Magnetic\u003cbr\u003eFence Size (L x H\/in.) : 46 x 5\u003cbr\u003eFence Travel (Major and Minor\/in.) : 5-3\/8 and 3-5\/8\u003cbr\u003eHeight (in): 53\u003cbr\u003eLength (in): 51\u003cbr\u003eMaximum Diameter Cutter Above Table (in) : 12\u003cbr\u003eMaximum Diameter Cutter Below Table (in) : 9\u003cbr\u003eMotor HP : 7-1\/2HP\u003cbr\u003eMotor Phase : 3PH\u003cbr\u003eMotor Voltage : 230\/460V\u003cbr\u003eNet Weight (lb): 1,100\u003cbr\u003eOverall Dimensions : 51 x 44 x 53\u003cbr\u003ePart Number : 1791284\u003cbr\u003ePrewired : Prewired 230V\u003cbr\u003eReversible : Yes\u003cbr\u003eRouter Bit Collet Diameter (in) : 1\/4 and 1\/2\u003cbr\u003eSlide Table Size (in) : 11-1\/4 x 51-1\/4\u003cbr\u003eSpindle Diameter (in) : 3\/4, 1, and 1-1\/4\u003cbr\u003eSpindle Size Under Nut (in) : 3\/4 Spindle - 3-1\/2, 1 Spindle - 6-1\/4, 1-1\/4 Spindle - 6-1\/4\u003cbr\u003eSpindle Speed (RPM) : 3000, 4000, 6000, 8000, and 10,000\u003cbr\u003eSpindle Travel (in) : 7\u003cbr\u003eTable Inserts : one tilting, two straight\u003cbr\u003eTable Size (in) : 51-1\/2 x 33-1\/2\u003cbr\u003eTable Travel (in) : 49-1\/4\u003cbr\u003eTilting Spindle (deg.) : 5° back, 45° forward\u003cbr\u003eWidth (in): 44\u003cbr\u003eShipping weight 1,280 lb.\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 4 -7 approximately business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. \u003c\/p\u003e\u003c\/div\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":43403960909962,"sku":"823891","price":15399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/823891_000_001.jpg?v=1719948907"},{"product_id":"laguna-pro-shaper-5-hp","title":"Pro Shaper - 5 HP","description":"\u003cp\u003eThis great Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. The table measures an impressive 31” x 39” and is predrilled to accept most quality power feeders. The fence features micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1\/16” adjustment to the fence. These shapers offer 3 speeds with a unique quick-change poly-groove belt system rather than the traditional V-belt. There’s even a digital readout, reversing switch, and all controls are mounted on an easy-access panel.\u003cbr\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePowerful motor for industrial-level shaping performance\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast iron table for stability and accuracy\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction ensures durability and long service life\u003c\/li\u003e\n\u003cli\u003eBuilt-in safety features for secure, controlled cutting\u003c\/li\u003e\n\u003cli\u003eIdeal for moldings, profiles, and joinery work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 1 Ph, 220V, 5 HP\u003c\/li\u003e\n\u003cli\u003eModel Number: MSHAP5010\u003c\/li\u003e\n\u003cli\u003eSpindle Speeds: 5000 \/ 7000 \/ 10000 RPM\u003c\/li\u003e\n\u003cli\u003eSpindle Travel: 4”\u003c\/li\u003e\n\u003cli\u003eSpindle Sizes: 3\/4” and 1-1\/4”\u003c\/li\u003e\n\u003cli\u003eCapacity Under Nut: 6” (for 1-1\/4” spindle) and 4” (for 3\/4”)\u003c\/li\u003e\n\u003cli\u003eRouter Collets: 1\/4\" and 1\/2”\u003c\/li\u003e\n\u003cli\u003eTable: 39-5\/16” x 31-7\/16” x 3-1\/2”\u003c\/li\u003e\n\u003cli\u003eTable Opening Diameter: 7-5\/16”\u003c\/li\u003e\n\u003cli\u003eDigital Readout comes standard\u003c\/li\u003e\n\u003cli\u003eDirection: forward \/ reversing switch\u003c\/li\u003e\n\u003cli\u003eMicro-adjustment Fence\u003c\/li\u003e\n\u003cli\u003eWeight: 640 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Laguna Pro Shaper - 5 HP\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eYour order will ship in approximately \u003cb\u003e4 weeks.\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e \u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e \u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003cli\u003eLiftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eLaguna does \u003cstrong\u003enot\u003c\/strong\u003e accept returns.  If your shipment was damaged, please refuse delivery, for defective items, please contact Woodcraft Supply customer service @ 1-800-535-4482.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eNew woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades' welds are backed by their 1-yr manufacturer's warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers’ defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect. They require that the defective item\/part be returned to Laguna Tools with the complaint. In the event the item\/part is determined to be damaged due to lack of maintenance, cleaning or misuse\/abuse, the customer will be responsible for the cost to replace the item\/part, plus all related shipping charges. \u003c\/p\u003e\n\u003cp\u003eFor warranty repair information, call 1-800-332-4094.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":43403991842954,"sku":"417659","price":5499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/417659_000_001.jpg?v=1719952051"},{"product_id":"shaper-trace","title":"Trace Frame Drawing Tool Kit for CNC Machines","description":"\u003cdiv\u003eShaper Trace, a drawing toolkit that allows you to turn any sketch or drawing into a vector graphic by simply taking a picture. Place the Trace Frame over your sketch and convert it into a Scalable Vector Graphic (SVG) with the Trace App, ready for fabrication using the tool of your choice, from laser cutters and vinyl cutters to CNC machines and more. The kit includes the trace frame, an artist pen, and access to the trace application.  \u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(1) Shaper Trace Frame for CNC Machines\u003c\/li\u003e\n\u003cli\u003e(1) Artist pen\u003c\/li\u003e\n\u003cli\u003eAccess to the trace frame application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e","brand":"Shaper","offers":[{"title":"Default Title","offer_id":44379933048970,"sku":"189372","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/1711\/1178\/files\/189372_000_001.jpg?v=1771273336"}],"url":"https:\/\/www.woodcraft.com\/collections\/shapers.oembed","provider":"Woodcraft","version":"1.0","type":"link"}